3-7
EO18-33003A
3. INSTALLATION PROCEDURE FOR THE OPTIONAL EQUIPMENT
3.2 CENTRONICS INTERFACE BOARD (B-7704-C-QM)
3.2.1
Packing List
All the following parts are supplied with the kit. Make sure you have all items shown below.
Centronics I/F Board (1 pc.)
Installation Manual (1 pc.)
Locking Support WLS-16-0
(1 pc.)
3.2 CENTRONICS INTERFACE BOARD (B-7704-C-QM)
CENTRO Flat Cable (1 pc.)
3.2.2
Installation Procedure
1) Turn the power off.
2) Open the top cover and remove the two PT-3x10 screws. (Refer to section 3.1.)
3) Disconnect the KEY LED Harness from CN14 on the CPU PC board and detach the side cover
L. (Refer to section 3.1.)
4) Remove the blind plate from the rear of the side cover L. (For QQ model.)
Fig. 3-16
Fig. 3-17
Side Cover L
Blind Plate
