2-17
EO18-33003A
2. MAJOR UNIT REPLACEMENT
5) Push out the rivet which secures the sensor PCB (LED) from the back side of the sensor block.
6) Disconnect the harness from the sensor PCB (LED) and remove the sensor PCB (LED) from the
sensor block.
7) Replace the sensor PCB (LED) with a new one, and then reassemble in the reverse order of
removal.
NOTE: Secure the sensor PCB (LED) with the rivet together with the slide button bottom.
8) After replacement, refer to Section 6.7 THRESHOLD SETTING in this manual to make a sensor
adjustment.
2.6 REPLACING THE MEDIA SENSOR
Fig. 2-28
Sensor PCB (LED)
Rivet
Sensor Block
Harness
