5-5
EO18-33003A
5. ON LINE OPERATION
■
LED Indication Table (Operation Panel)
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
POWER
ON LINE
ERROR
Printer Status
On-line mode
On-line mode
(during communication)
The head cover is opened in on-
line mode.
Pause
A parity, overrun or framing error
occurred during RS-232C com-
munication.
A paper jam occurred during
paper feed.
An error occurred at the cutter
module.
The paper has run out.
Paper feed or issue is attempted
with the print head block opened.
The print head is too hot.
Ribbon error
(ribbon end, ribbon break)
Writable character and PC
command registration mode
An error occurred when writing
data into the flash memory.
A deletion error occurred while
formatting the flash memoty.
No more data can be saved in the
flash memory.
Undefined command is retrieved.
A zero-dividing error occurred.
A momentary power failure
occurred.
Backup EEPROM is not read/
written properly.
The stacked paper is full.
The label issue is attempted
when the stacker power is OFF.
The connector of the environmen-
tal temperature thermistor comes
off.
The prit head has broken ele-
ments.
-
-
-
Possible
Possible
Possible
Possible
Possible
Possible
When the print head
temperature be-
comes under 60
°
C,
printing restarts
automatically.
-
Impossible
Impossible
Impossible
Possible
Impossible
Impossible
Impossible
Impossible
Possible
Possible
Impossible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Possible
Impossible
Impossible
Impossible
Possible
Possible
Possible
Possible
LED Indication
Restoration by pressing
the [PAUSE] key
Possible/Impossible
Status request reset
command reception
Possible/Impossible
: ON
: OFF
: BLINK
5.1 RESET OPERATION
