6-39
EO18-33003A
6. DIAG. TEST OPERATION
6.4 TEST PRINT MODE
Set the print speed
Set the print count from those at the
right by pressing the [
↓
] key or
[
↑
] key. (See NOTE 2.)
Select the print speed from those at
the right by pressing the [
↑
]
key or [
↓
] key.
Select the sensor type from
those at the right by pressing
the [
↑
] key or [
↓
]
key. (See NOTE 2 and 4.)
Press the [C] key.
Press the [
→
] key. (See NOTE 3.)
Press the [
→
] key. (See NOTE 3.)
Press the [
→
] key. (See NOTE 3.)
P R
N T
S P E E D
2 " / s
I
S E
S O R
T R A N S .
N
From (B) of the preceding page.
To (C) of the
preceding page.
Press the [C] key.
To (C) of the
preceding page.
Press the [C] key.
To (C) of the
preceding page.
To be continued on
(D) of the next page.
Set the sensor type
5000 (Print count 5000)
1000 (Print count 1000)
500 (Print count 500)
100 (Print count 100)
50 (Print count 50)
10 (Print count 10)
5 (Print count 5)
3 (Print count 3)
1 (Print count 1)
4"/sec. (B-452-TS) or 2"/sec. (B-452-HS)
NONE
(consecutive form)
REFLECT
(black mark sensor)
TRANS
(feed gap sensor)
2"/sec. (B-452-TS) or 2"/sec. (B-452-HS)
R I
B O N
U S
B
E
Press the [
→
] key.
(See NOTE 3.)
Press the [C] key.
Select the ribbon from those
at the right by pressing the
[
↑
] key or [
↓
] key.
USE
NONE
To (C) of the preceding page.
Select the ribbon
NOTE: For the B-452-HS
model, this parameter
is fixed to RIBBON USE
by the printer parameter
setting.
