7-7
EO18-33003A
7. PROGRAM DOWN LOAD FOR PRINTER
7.6. ERROR MESSAGE
Error Message
Command Error
Printer COM Error
Write Error
Erase Error
Checksum Error
Printer Off
PC COM Error
Unknown Status
Error
Command error (Error is detected during command analsis.)
Communication error (Parity, overrun, or framing error oc-
curred during communication.)
A write error occurred while data was being written onto the
flash ROM.
A delete error occurred while the flash ROM is formatted.
A checksum error occurred in the transmission program
data.
The printer power is OFF or the communication cable is not
connected properly.
A COM open error or hardware error occurred.
Undefined status was received.
Remarks
Status from the
printer.
Status from the
PC.
7.6 ERROR MESSAGE
When the download failed, the following error messages are displayed.
• Using the RS-232C Interface
Error Message
Device Time Out
‘LPT1:’ Open
Error!!
Error
The printer power is OFF or the interface cable is not con-
nected properly.
A LPT open error occurred.
Remarks
Status from the
PC.
Status from the
PC.
17)
The program is downloaded to the PC.
18)
When the download is completed successfully, “Complete” is displayed.
19)
When the download failed, an error message is diplayed.
Complete
OK
Error Message
OK
• Using the Centronics Interface
