6-26
EO18-33003A
6. DIAG. TEST OPERATION
6.3 PARAMETER SETTING MODE
6.3.9
Transmission Control Mode Selection
NOTES: 1. Holding the [
↓
] key or [
↑]
key down for more than 0.5 seconds enables a fast forward.
2. A changed transmission control mode is stored in keyboard memory by pressing the
[
→
] key.
Power off
Turn on the power while
holding down the [SHIFT]
key .
Press the [
↓
] key.
Press the [
→
] key nine times.
Select Transmission Control
Mode Selection with the
[
↓
] key or [
↑
]
key. (See NOTE 1.)
Press the [ENTER] key.
Press the [
→
] key.
Continued on Section 6.3.10
Control Code Selection.
< 1
D I A G .
>
< 2
P A R A M E T E R
S E T
>
X O
+ R E A D Y A U T O
N
S E
T O
P R I N
?
T
T E R
Y E
: [ E N T ]
N
C ]
S
O : [
Press the [ENTER] key or [C] key.
Press the [C] key.
•
XON/XOFF AUTO: XON/XOFF mode
(XON at power on, XOFF at power off)
•
XON+READY AUTO: XON/XOFF+READY/
BUSY (DTR) mode
(XON at power on, XOFF at power off)
•
READY/BUSY: READY/BUSY
(DTR) mode (No XON at power on nor
XOFF at power off)
•
XON/XOFF: XON/XOFF mode
(No XON at power on nor XOFF at power
off)
•
READY/BUSY RTS: READY/BUSY (RTS)
mode (No XON at power on nor XOFF at
power off)
