Teac FD-55 Series, Maintenance Manual

Page: 57 / 216

Connector Jll (option) is installed upright on the PCB. Though the
shape of Jll is little different from the connector below in the
figure, pull up the edges of the upper protruding area in the same
manner.
Cable
Housing clamper
Upper protruding area
Post pin side
‘ ush up
Pin numbers
(Pig.402) Disconnection of white connector
(b) Connection of the connector
Push the connector into the post pin on the PCBA with the housing
clamper up. ' - '
For the connector Jll (option) , bring the hole of the pin onto the
post pin position and push it. It will not be pushed in an opposite
location.
(c) Removal of the pin (for reference)
Refer to Fig.403. ~ ' *
Depressing the stopper of the pin lightly with a narrow object such
as a pair of tweezers, pull the cable in the direction indicated by
the arrow.
(d) Insertion of the pin (for reference) "
Before insertion, check the following three points.
i) Confirm that the sheath and the core of the cable are securely
clamped.
4017