Teac FD-55 Series, Maintenance Manual

Page: 186 / 216

Notes : 1. As to the parts with an asterisk in the £>'ty column, select
appropriate one for the model.
2. As to the parts with model name of FD-55(L) in the Description column,
the parts is used only for the model._ *
3. For the DD motor Ass'y of FD-55CL) A or B, either of 14733730-00 and
-10 may be used. (Mainly -10 is used at shipment).
For the stepping motor A s s 1y of FD-55(L) A or B , either of 14769070-00
and -50 may he used. (Mainly -50 is used at shipment).
4. Pad 9B is attached for the adjustment of head touch (refer to item
4-4-9) and some models might not have it. Usually, double sided
FDDs have not 9B pad.
5. The head protector Ass'y applies only to the double sided models with
head load solenoid.
6. The shift lever (P/N 16802550-00) is used in all the models except
for CSS models. P/N 16802592-00 is used only in the double sided
CSS models.
7. The parts number of the lever shaft A s s ‘y listed in the table is the
standard length. Optional lever shaft Ass'y which length is different
should be designated with other parts number.
8. The head load solenoid Ass'y applies only to the models with head
load solenoid. The CSS Ass'y applies only to the double sided models
without head load solenoid. The head load solenoid Ass'y and the
CSS Ass'y will never be used together in a model.
9. The head carriage Ass'y is supplied in combination with two guide
shafts. Be sure to replace the head carriage Ass'y-with these guide
shafts.
10. The parts number versions of the PCBA MFD control #B and the PCBA
front OPT vary depending on each model. Refer to the name plate
of the actual PCBA mounted to designate the version.
11. fThe parts numbers of the front bezel Ass'y and the front lever Ass'y
are those of FD-55(L) standard color, black. For designating the
other color, refer to the following table. Optional designation of
colors than in the table or other forms, different parts numbers
should be used.
509