34
www.tcsmeters.com
Total Control Systems
TCS 3000 Installation
Installation Procedure — 1 Channel Communication Installation
Installation Procedure:
1.
Remove the six Screws holding the Wiring Shield to the M8 x 27 Standoffs.
2.
Remove the two top M8 x 27 MM Standoffs and replace with two M4 x 14 Standoffs
3.
With two M4 x 14 Standoffs, mount the Single Channel Communication Board over the two top (short) M4 x 11
Standoffs.
4.
Install the Wiring Shield with six Screws.
5.
Replace USB cable adapter into wiring shield for safe keeping.
COMMUNICATION BOARD
M4 X 14 STANDOFF
SCREWS
WIRING SHIELD
M4 X 11 STANDOFF
