25
TCS 3000 Installation
www.tcsmeters.com
Total Control Systems
Installation Procedure — Printer
The DIP Switch on Pole
3 must be set to ON.
Installation Procedure:
1.
Find a suitable location for the printer appropriate to your application.
2.
Secure the printer in place with the Velcro strip provided.
3.
Wire the power and communication cables into the back of the printer.
4.
Run the communication cable to the back of the TCS3000.
5.
Screw the cable gland into the back of the TCS3000 and tighten.
6.
Insert the printer communication cable into the cable gland and wire into the correct location on the terminal
board.
7.
Compress the cable gland on the TCS3000 until it is snug on the printer communication cable.
NOTE: Once DIP Switch 3 has been moved to position ON; You must cycle power for the Parameter to retain.
The DIP Switch on Pole
3 must be set to ON.
Epson Roll Printer
Epson Slip Printer
DETAIL B
DETAIL A
