Section 7.0 HMI Introduction
HGA IOM
72
•
On this pop-up screen, ensure the “Auto Start
Setup” button is OFF (Blue). If button is ON
(Green), press to toggle off.
•
Navigate back to “Tech Setup” screen
•
Now select “Save Settings”
•
Press “Home” to navigate to Home screen
3) Home screen check
•
Compare “Freq” to expected line frequency
•
Compare “Voltage” to expected line Voltage
•
“Current” expected to be zero because unit is
not running and CT inputs are shorted
•
If status indicates a Fault, press “Stop” button
to reset condition