TBK vision TBK-NVR2200 Series User Manual Download Page 59

Page: 59 / 216

TBK-NVR2200 Network Video Recorder User Manual

www.tbkvision.com

3.3 Adjusting Live View Settings

Purpose:

Live View settings can be customized according to different needs. You can configure the output

interface, dwell time for screen to be shown, mute or turning on the audio, the screen number for
each channel, etc.

Step 1

Enter the Live View Settings interface.

Menu> Configuration> Live View

Figure 3-7

Live View-General

The settings available in this menu include:

⚫

Video Output Interface:

Select the video output to configure the live view parameters.

⚫

Live View Mode:

Select the display mode to be used for live view.

⚫

Dwell Time:

The time in seconds to

dwell

between switching of channels when enabling

auto-switch in Live View.

⚫

Enable Audio Output:

Enables/disables audio output for the selected video output.

⚫

Volume:

Adjust the volume of live view, playback and two-way audio for the selected output

interface.

⚫

Event Output:

Designates the output to show event video.

⚫

Full Screen Monitoring Dwell Time:

The time in seconds to show alarm event screen.

Step 2

Set cameras order.

Summary of Contents for TBK-NVR2200 Series

























































































































































































































Search results

Summary of Contents for TBK-NVR2200 Series

Reviews:

TBK vision TBK-NVR2200 Series, User Manual, Page: 59 / 216

Search results

Summary of Contents for TBK-NVR2200 Series

Reviews: