TBK-NVR2200 Network Video Recorder User Manual V2
154
-9
NO-IP Settings Interface
Step 5 Click the
Apply
button to save and exit the interface.
11.2.3 Configuring PPPoE
Purpose:
Your NVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Step 1
Enter the
Network Settings
interface.
Menu >Configuration> Network
Step 2
Select the
PPPoE
tab to enter the PPPoE Settings interface, as shown in Figure 11-10.
Figure 11-10
PPPoE Settings Interface
Step 3
Check the
PPPoE
checkbox to enable this feature.
Step 4
Enter
User Name
, and
Password
for PPPoE access.
The User Name and Password should be assigned by your ISP.
Step 5
Click the
Apply
button to save and exit the interface.
Step 6
After successful settings, the system asks you to reboot the device to enable the new
settings, and the PPPoE dial-up is automatically connected after reboot.
You can go to Menu >Maintenance>System Info >Network interface to view the status of PPPoE
connection.
11.2.4 Configuring NTP Server
Purpose:
Summary of Contents for TBK-NVR2200 Series
Page 216: ...216 www tbkvision com...