TBK vision TBK-NVR2200 Series User Manual Download Page 5 | Manualshive

Page: 5 / 216

TBK vision TBK-NVR2200 Series User Manual Download Page 5

TBK-NVR2200 Network Video Recorder User Manual

www.tbkvision.com

5

Safety Instructions

⚫

Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.

⚫

In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region. Please refer to technical specifications for detailed
information.

⚫

Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with 100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to
technical specifications for detailed information.

⚫

Do not connect several devices to one power adapter as adapter overload may cause over-
heating or a fire hazard.

⚫

Please make sure that the plug is firmly connected to the power socket.

⚫

If smoke, odor or noise rise from the device, turn off the power at once and unplug the power
cable, and then please contact the service center.

«
...
3
4
5
6
7
...
»

Summary of Contents for TBK-NVR2200 Series

























































































































































































































Reviews:

No comments