TBK-NVR2200 Network Video Recorder User Manual
129
Menu > Configuration > Exceptions
Step 2
Check the checkbox of
Enable Event Hint
.
Figure 8-14
Event Hint Settings Interface
Step 3
Click the
to set the type of event to be displayed on the image.
Figure 8-15
Event Hint Settings Interface
Step 4
Click the
OK
button to finish settings.
Full Screen Monitoring
When an alarm is triggered, the local monitor (VGA, HDMI or BNC monitor) display in full screen
the video image from the alarming channel configured for full screen monitoring.
If alarms are triggered simultaneously in several channels, their full-screen images will be switched
at an interval of 10 seconds (default dwell time). A different dwell time can be set by going to
Menu >Configuration>Live View > Full Screen Monitoring Dwell Time.
Auto-switch will terminate once the alarm stops and you will be taken back to the Live View
interface.
You must select during “Trigger Channel” settings the channel(s) you want to make full screen
monitoring.
Audible Warning
Trigger an audible
beep
when an alarm is detected.
Summary of Contents for TBK-NVR2200 Series
Page 216: ...216 www tbkvision com...