TBK-NVR2200 Network Video Recorder User Manual V2
176
Figure 12-13
Local HDD Settings Interface
Step 7
Select the Group number for the current HDD.
The default group No. for each HDD is 1.
Step 8
Click the
OK
button to confirm the settings.
Figure 12-14
Confirm HDD Group Settings
Step 9
In the pop-up Attention box, click the
Yes
button to finish the settings.
12.3.2 Setting HDD Property
Purpose:
The HDD property can be set to redundancy, read-only or read/write (R/W). Before setting the
HDD property, please set the storage mode to Group (refer to step1-4 of Chapter Setting HDD
Groups ).
A HDD can be set to read-only to prevent important recorded files from being overwritten when
the HDD becomes full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both onto the
redundancy HDD and the R/W HDD simultaneously so as to ensure high security and reliability of
video data.
Step 1
Enter the HDD Information interface.
Menu > HDD> General
Summary of Contents for TBK-NVR2200 Series
Page 216: ...216 www tbkvision com...