TBK-NVR2200 Network Video Recorder User Manual
185
Step 4
Select the HDD No. in the dropdown list you want to configure, and choose All Detection or
Key Area Detection as the detection type.
Step 5
Click the
Detect
button to start the detection.
Figure 12-26
Bad Sector Detection
And you can click
Error info
button to see the detailed damage information.
And you can also pause/resume or cancel the detection.
12.8 Configuring HDD Error Alarms
Purpose:
You can configure the HDD error alarms when the HDD status is
Uninitialized
or
Abnormal
.
Step 1
Enter the Exception interface.
Menu > Configuration > Exceptions
Step 2
Select the Exception Type to
HDD Error
from the dropdown list.
Step 3
Click the checkbox(s) below to select the HDD error alarm type (s), as shown in Figure 12-27.
The alarm type can be selected to: Audible Warning, Notify Surveillance Center, Send Email and
Trigger Alarm Output. Please refer to
Chapter Setting Alarm Response Actions
.
Summary of Contents for TBK-NVR2200 Series
Page 216: ...216 www tbkvision com...