TBK vision TBK-NVR2200 Series User Manual Download Page 190

Page: 190 / 216

TBK-NVR2200 Network Video Recorder User Manual V2

www.tbkvision.com

190

Chapter 14 NVR Management and Maintenance

14.1 Viewing System Information

Step 1

Enter the System Information interface.

Menu >Maintenance>System Info

Step 2

You can click the

Device Info

Camera

Record

Alarm

Network

and

HDD

tabs to view the

system information of the device.

Figure 14-1

Device Information Interface

You can add the device to your mobile client software via scanning the QR Code.

14.2 Searching & Exporting Log Files

Purpose:

The operation, alarm, exception and information of the NVR can be stored in log files, which can

be viewed and exported at any time.

Step 1

Enter the Log Search interface.

Menu > Maintenance > Log Information

XXXXXXXXXXX

XXXXXXXXXXXXXXXXX

XXXXXXXXXXX

Summary of Contents for TBK-NVR2200 Series

























































































































































































































Search results

Summary of Contents for TBK-NVR2200 Series

Reviews:

TBK vision TBK-NVR2200 Series, User Manual, Page: 190 / 216

Search results

Summary of Contents for TBK-NVR2200 Series

Reviews: