TBK-NVR2200 Network Video Recorder User Manual
179
Figure 12-18
Copy Settings to Other Camera(s)
Step 6
Select the camera (s) to be configured with the same quota settings. You can also click the
checkbox of IP Camera to select all cameras.
Step 7
Click the
OK
button to finish the Copy settings and back to the Storage Mode interface.
Step 8
Click the
Apply
button to apply the settings.
If the quota capacity is set to
0
, then all cameras will use the total capacity of HDD for record and
picture capture.
12.5 Configuring Disk Clone
Purpose:
If the S.M.A.R.T. detection result declares the HDD is abnormal, you can choose to clone all the
data on the HDD to an inserted eSATA disk manually. Refer to
Chapter 12.8 HDD Detection
for
details of S.M.A.R.T detection.
Before you start:
An eSATA disk should be connected to the device.
Step 1
Enter the HDD Advanced Setting interface:
Menu > HDD > Advanced
Step 2
Click the
Disk Clone
tab to enter the disk clone configuring interface.
Summary of Contents for TBK-NVR2200 Series
Page 216: ...216 www tbkvision com...