TBK vision TBK-NVR2200 Series User Manual Download Page 116

Page: 116 / 216

TBK-NVR2200 Network Video Recorder User Manual V2

www.tbkvision.com

116

Stay in the Exporting interface until all record files are exported with pop-up message box

“Export finished”.

Figure 7-8

Export Finished

The backup of video files using USB writer or SATA writer has the same operating instructions.

Please refer to steps described above.

7.1.3 Backing up by Event Search

Purpose:

Back up event-related record files using USB devices (USB flash drives, USB HDDs, USB writer), SATA

writer or eSATA HDD. Quick Backup and Normal Backup are supported.

Step 1

Enter Export interface.

Menu>Export>Event

Step 2

Select the cameras to search.

Step 3

Select the event type to alarm input, motion, or VCA.

Figure 7-9

Event Search for Backup

Summary of Contents for TBK-NVR2200 Series

























































































































































































































Search results

Summary of Contents for TBK-NVR2200 Series

Reviews:

TBK vision TBK-NVR2200 Series, User Manual, Page: 116 / 216

Search results

Summary of Contents for TBK-NVR2200 Series

Reviews: