TB Wood's WFC1000 Series, Installation, Operation And Maintenance Instructions

Page: 28 / 82

20
3.4 Program Mode
When in the STOP mode, pressing this key will enter the PROGRAM mode at Level 1.
Pressing this key at any time while in the PROGRAM mode will return the unit to the
OPERATION mode. Pressing the SHIFT and PROG keys simultaneously will enter Level 2. If
an Access Code has been entered, re-entry is required to change program data.
In the PROGRAM mode, pressing this key will move forward through the successive
Parameter Addresses. When changing Data in a Parameter, this key will increment the data
value. The ENTER key must be pressed to store the new value.
In the PROGRAM mode, pressing this key will move backward through the successive
Parameter Addresses. When changing Data in a Parameter, this key will decrement the data
value. The ENTER key must be pressed to store the new value.
NOTE: At all parameters except 85-UNITS, momentarily pressing both the UP-arrow and
DOWN-arrow keys simultaneously will return the parameter setting to factory defaults.
Pressing this key while a Parameter is displayed will allow that Parameter to have its data
changed by use of the UP and DOWN arrow keys.
Pressing this key after data has been changed in a Parameter will store that information in
nonvolatile memory.
KEY FUNCTION
3.5 Status (LED) Indicators
The red Stop LED, located in the STOP key, illuminates whenever a stop command has been
given. If the inverter has stopped due to a fault, this LED will flash to call attention to the digital
display.
The green Forward LED, located in the FWD key, illuminates whenever a forward command
has been given. When both the Forward and Reverse LED’s are on, the DC braking function is
active.
The green Reverse LED, located in the REV key, illuminates whenever a reverse command
has been given. When both the Forward and Reverse LED’s are on, the DC braking function is
active.
The green Jog LED, located in the JOG key, illuminates to signify the inverter is in the JOG
mode of operation.
LED INDICATION/LOCATION
PROG
SHIFT
ENTER
REV
JOG
STOP
FWD
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com