TB Wood's WFC1000 Series, Installation, Operation And Maintenance Instructions, Page: 26 / 82

18
SECTION 3
GETTING STARTED
3.1 General Information
• All WFC HT Series Inverters come with a digital keypad as standard equipment.
• Your WFC HT AC Inverter is preprogrammed to run a standard AC induction motor; in many cases no
additional programming is required.
• WFC
HT
’s advanced digital keypad controls all operations of the inverter. The ten input keys allow “Press and
Run” operation of the motor and straightforward programming of the parameters. To simplify the
programming further, the parameters are separated into programming levels:
LEVEL 1 Easily accessed by pressing the PROG key at anytime. Limits access to the most commonly used
parameters for operator convenience.
LEVEL 2 This is used when the more advanced features of WFC HT are needed. It is accessed by pressing the
SHIFT and PROG keys simultaneously. All parameters can be either viewed or programmed except
those associated with the SIO Serial Communications Link.
LEVEL 3 This level is automatically added to Level 2 when the SIO Serial Input/Output link is selected.
3.2 Digital Keypad
The digital keypad controls the WFC HT in both the operating and programming modes. A detailed description of
all the keys and displays follows:
FIGURE 3.2
PRO
G
FW
D
REV JOG
ST
OP
SHI
FT
ENT
ER
LOC
REM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com