TB Wood's WFC1000 Series, Installation, Operation And Maintenance Instructions

Page: 47 / 82

39
Parameter Units Level
82-START - Inverter Start Options L2
This parameter selects options such as line start lockout, line starting or starting a rotating motor. 82-START
also allows the keypad STOP key to function as an emergency stop when operating the inverter from the
terminal strip. Various options for 82-START include:
Note: When data codes 2, 3, 6 or 7 are selected, the display will indicate SPD SEARCH upon the initiation of
a run command.
0
1
2
3
4...7
DATA CODE DESCRIPTION
Line start lockout. When the inverter is configured for terminal strip operation with a
maintained run command present, it will not start upon the application of line power. The
direction command must be removed and re-established to start the drive. The keypad
STOP functions as an EMERGENCY STOP when controlling the inverter from the terminal
strip. Recovery from an EMERGENCY STOP will require that the STOP key be pressed a
second time and then the direction command re-established.
Line start (Autostart). With this setting, the drive will turn on when power is applied and a
direction command is present. The STOP key is configured as an EMERGENCY STOP
when operating from the terminal strip.
This setting allows the drive to successfully start a rotating motor. Line Start Lockout is
active. The STOP key functions as an EMERGENCY STOP when operating from the
terminal strip.
Start into a rotating motor with Autostart. STOP key enabled.
Same start functions as 0 thru 3, but STOP key totally disabled in terminals mode.
WARNING
INSURE THAT AUTOMATIC RESTARTING WILL NOT CAUSE DAMAGE TO EQUIPMENT OR
INJURY TO PERSONNEL.
ADVERTISSEMENT
ASSUREZ VOUS QU’UN DEPART AUTOMATIQUE N’ENDOMMAGERA PAS L’EQUIEMENT OU
DE BLESSURE AU PERSONNEL.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com