Taylor-Dunn B0-T48-48 Taylor Truck T48, Operation, T Roubleshooting And Replacement Parts Manual

Page: 20 / 242

SAFETY RULES AND OPERATING INSTRUCTIONS
Safety Rules
Page 8
Smart View Display
The Smart View Display (SVD) functions as a Battery Status Indicator (BSI), Hour Meter (HM), speed controller
status monitor, and as an optional maintenance monitor feature. The operation of each of these functions is listed
below.
BSI : A bar graph representing the current state of charge is located across the top of the display. When the batteries
are fully charged, all segments of the bar graph will be on. As the batteries are used, segments will turn off in the
order of right to left.
When the batteries are discharged to 75%, the last three segments will flash indicating that you are approaching the
end of the battery cycle. At this time, the vehicle’s batteries should be charged as soon as possible.
At 90%, all segments will flash and the vehicles speed will be reduced. At this time, the vehicle should be removed
from service for charging. Discharging beyond 90% will result in damage to the batteries that will shorten the battery
life-span.
HM: There are two hour meter functions, Key Hours and Run Time Hours.
Key Hours is the accumulated length of time in hours that the key switch is in the “ON” position.
Run Time Hours is the accumulated length of time that the vehicles has been in operation. Time is accumulated
when the FS-1 switch in the accelerator module is closed.
One of the Hours functions is being displayed whenever the either of the Hours Indicators are visible at the right side
of the display.
Key Hours icon
Key Hours: When the display is turned on, the Key Hours
will be displayed for approximately 5-seconds as
indicated by the Key Hours Indicator located at the lower
left of the display. The icon represents the silhouette of
a key.
Run Time Hours icon
Run Time Hours: After the initial 5-seconds, the Run
Time Hours will be displayed as indicated by the Run
Time Hours Indicator located at the left of the display.
The icon represents a motor symbol with a “T” in the
center.