1
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
STP²
Introduction
The STP² planter features quality, efficiency, low cost,
easy operation and low maintenance. It was designed to plant
great grains such as: corn, soybean, rice, beans, sorghum,
cotton with linter/delinted, peanut and so on.
The row units have a parallelogram for a greater flexibility
of the moving parts that work over the soil, so it is possible to
work through the soil unevenness.
The seed metering system use horizontal seed plates,
mounted over the dosing hoppers, allowing the plantation of
grains with several sizes.
The fertilizer metering system uses individual coil pitch
augers and the amounts are obtained through the sprocket
combinations, thus offering uniformity on every outlet tubes.
This instructions manual contains the necessary
information for the best performance of this planter. The
operator must carefully read the entire manual before working
with the equipment. Also, read and understand the safety
recommendations.
For any further clarification or in the event of technical
problems that may arise during the service, consult your
dealer and the Technical Support department of the factory.
They can ensure the fully functioning of your TATU planter.
