20
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
STP²
Set-up instructions
Recommendations:
• The graphite should not be combined before the seed treatment.
• The graphite should not be combined to the insecticide to apply in the seeds.
• For non-treated seeds, use only half of the graphite mentioned on the previous
page.
• For treated seeds, clean the metering mechanism at least once a day.
List of standard seed plates
The amount of seed plates that are included with the planter corresponds
to the number of row units.
ATTENTION
Optional seed plates list on page 40.
Seed plate
Amount of holes Hole diameter Thickness
Serial number
Corn
28 holes
Ø 9 mm
4.5 mm
05.03.03.2127
Bean/soybean
40 slots
9 x 14 mm
5.5 mm
05.02.02.0407
Seed plate seat
-
-
3 mm
05.01.01.3355
Seed plates of 4.5 mm, 5.5 mm
or 8.5 mm (Without false ring)
3 mm false ring
Check the options
for several crops
and grain sizes on
page 40.
• The available height for the placement of the plate plus the false ring is
8.5 mm, however:
If a plate has a thickness of 4.5 mm, the false ring must have 4 mm.
To use a plate that has a thickness of 5.5 mm, place a false ring of 3 mm.
Do not put a false ring if a plate that has 8.5 mm of thickness is used.
NOTE
