21
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
STP²
Adjustments and operations
Seeds distribution
The seed distribution is done through slotted seed plates that are horizontally
positioned.
The amount and size of the holes/slots and the thickness of the seed plates can vary
according to the grain size and the desired plant amount.
Adjust the seed rate per linear meter through the sprocket combinations of the Drive
shaft
{A}
and Driven shaft
{B}
(Scheme 01).
IMPORTANT
Drive shaft {A}
Driven shaft {B}
Scheme 01
Seed
The following pages show the different amount of seeds distributed
to many crops, according to the sprocket combinations.
Note that the table for the corn seed plates considers 10 (ten) linear
meters.
The correct seed plate matching to the used seeds is very important.
Define the seed plate holes previously using seeds that are already
treated and with graphite.
Never combine seeds of different sizes.
