17
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
STP²
Set-up instructions
Preparing the tractor
Centralizing and leveling the planter
To facilitate the adjustments, the planter must be centralized with the tractor, which
is done as follows:
• Place the tractor and planter on a flat place.
• Align the planter drawbar with the tractor third point.
• Totally lift the planter.
• Check if the distances between the lower arms and tires are equal on both sides (as
in "A"), being both of them leveled (as in "B").
• Level the equipment through the upper arm (third point).
• It is recommended to use counterweights on the front part of the tractor.
• Adjust the front and rear gauges to have the same opening (tires center).
"B"
"A"
Leveling on the
width
Adjuster
Leveling on the
length
Upper hydraulic
arm
Lower hydraulic
arm
