Tatu Marchesan STP2 Instruction Manual Download

Page: 45 / 50

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

STP²

Optional

Set for semi-tillage plantation

The kit for a semi-tillage plantation is optionally supplied. Assemble it as follows:
• Couple the hitch (A) to the frame (B) using the fixation elements: hitch guide fastener

(C), bolt (D), spring washers and nuts that can be found on the frame structure. Fasten the

drawbar supplement (E) using the fixation elements: bolt (F), spring washer and nut.

• Assemble the fastener support of the rod (G)

along with the arm fastener of the disc blade (H)

using a bolt, spring washer and nut in a way that

the frame (B) stay coupled between both of them.

NOTE

The fixation elements, hitch guide fastener (C), bolt (D), spring washer and

nut are the same ones that were removed from the tractor hitch.

Summary of Contents for STP2



















































Search results

Summary of Contents for STP2

Reviews:

Related manuals for STP2

Brands by name

Popular brands

Tatu Marchesan STP2, Instruction Manual

Search results

Summary of Contents for STP2

Reviews:

Related manuals for STP2

Brands by name

Popular brands