Tascam DR-701D, Reference Manual

Page: 6 / 46

6
TASCAM DR-701D
2 – Names and functions of parts
Front panel
1
Built-in stereo microphone
This stereo microphone uses two omnidirectional electret
condenser mics.
2
Front cover
This covers the battery compartment and the SD slot.
3
Battery compartment
Install batteries (4 AA) in this compartment to power the
unit.(see “Using AA batteries” on page 13)
4
SD card slot
Insert an SD card here.
Rear panel
5
Display
This shows a variety of information.
6
1 knob and PEAK indicator
Use the 1 knob to adjust the input level from the IN 1
connector on the left side of the unit.
The 1 PEAK indicator lights when the input level is about to
cause distortion.
During mic input, this also lights if distortion occurs in
the analog circuitry. During line level input, this does not
light even if distortion occurs in the analog circuitry.(see
“Adjusting the input level” on page 20)
7
2 knob and PEAK indicator
Use the 2 knob to adjust the input level from the IN 2
connector on the left side of the unit.
The 2 PEAK indicator lights when the input level is about to
cause distortion.
During mic input, this also lights if distortion occurs in
the analog circuitry. During line level input, this does not
light even if distortion occurs in the analog circuitry.(see
“Adjusting the input level” on page 20)
8
MENU button
When the Home Screen is open, press this button to open
the Menu Screen.
When a setting screen is open, press to move up one level in
the menu. When the Menu Screen is open, press to return to
the Home Screen.
9
MONITOR button
When not playing back, press to open the monitoring source
selection menu.
0
2/
7
button
When the Home Screen is open and the unit is stopped,
press this button to start playback.
When a file or folder is selected on the Browse Screen, press
this button to return to the Home Screen and play the file or
the first file in the folder from the beginning.
Press this button when a
CH1
/
CH2
/
CH3
/
CH4
item on a
menu page is shown to move the cursor to the channel 2
setting.
q
1/
8
button
Press this button during playback to stop playback and
return to the beginning of that playback file.
Press this button during recording to stop recording.
Press this button when a
CH1
/
CH2
/
CH3
/
CH4
item on a
menu page is shown to move the cursor to the channel 1
setting.
Use this button to answer “NO” to a confirmation message
when using a setting screen.
w
DUAL indicator
This lights orange when in dual recording mode.
e
REC indicator
This lights red when recording.
r
Record (
0
) button
Press when stopped to start recording.
t
3 knob and PEAK indicator
Use the 3 knob to adjust the input level from the IN 3
connector on the left side of the unit.
The 3 PEAK indicator lights when the input level is about
to cause distortion. During mic input, this also lights if
distortion occurs in the analog circuitry. During line level
input, this does not light even if distortion occurs in the
analog circuitry.(see “Adjusting the input level” on page
20)
y
4 knob and PEAK indicator
Use the 4 knob to adjust the input level from the IN 4
connector on the right side of the unit.
The 4 PEAK indicator lights when the input level is about
to cause distortion. During mic input, this also lights if
distortion occurs in the analog circuitry. During line level
input, this does not light even if distortion occurs in the
analog circuitry.(see “Adjusting the input level” on page
20)