TASCAM DR-701D
17
3 – Preparation
Setting the input functions
Recording with the built-in mics
Point the mics at the sound source and place the unit in a stable
location where there is little vibration.
Connecting microphones
Connect microphones to this unit’s IN 1, IN 2, IN 3 and IN 4
connectors.
Point the mics at the sound source and place the unit in a stable
location where there is little vibration.
Connect an external stereo mic to the EXT IN 1/2 jack on the left
side of the unit.
Stereo mic
Mic
Mic
Mic
Mic
Recording an external device (LINE IN)
Use stereo plug cables to connect to the output of an external
audio device.
Audio devices
CAUTION
•
Reduce the output level of the external audio device if the
input sound is distorted even when reducing the input gain
level on the unit.
•
When an external audio device with a fixed line output level
is connected, level overloads might occur and adjusting
the gain level might not be possible because of loud sound
sources, for example. In such cases, use the headphone jack
or another level-controllable output for connection to the
unit.
Connecting a time code generator
Use a BNC cable to connect a time code generator to this unit's
TIME CODE IN connector.
Time code generator
