D14128.03—JULY 2009
63
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xConfiguration SystemUnit CallLogging Mode:
{#{#On/Off>
Enables/disables logging of calls received or placed by the system. The call logs may then be viewed via the
GUI or using the xHistory command.
On: Enable logging.
Off: Disable logging.
Example:
xConfiguration SystemUnit CallLogging Mode: On
xConfiguration SystemUnit IrSensor Mode:
<On/Off/Auto>
The System Unit IR Sensor setting determines whether the infrared receiver on the codec should be
enabled or not. The IR sensor LED is located in the front of the codec and flickers when an ir signal is
received from the remote control.
On: Set to On to enable the IR sensor on the codec.
Off: Set to Off to disable the IR sensor on the codec.
Auto: The system will automatically disable the IR sensor on the codec if the IR sensor at camera is enabled.
Otherwise the IR sensor on the codec will be enabled.
Example:
xConfiguration SystemUnit IrSensor Mode: On
xConfiguration SystemUnit MenuLanguage:
<English/Norwegian/Swedish/German/
French/Italian/Japanese/Chinese/Russian/Spanish/Korean/Turkish>
The setting is used to select the language for the GUI (Graphical User Interface).
Example:
xConfiguration SystemUnit MenuLanguage: English
xConfiguration SystemUnit Name:
<S: 0, 50>
Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured on the system
then this ID will be used instead of the system name. The system name will be displayed:
* When the codec is acting as an SNMP Agent
* Towards a DHCP server
Format: String with a maximum of 50 characters.
Example:
xConfiguration SystemUnit Name: “Meeting Room Name”
xConfiguration Time DateFormat:
<DD_MM_YY/MM_DD_YY/YY_MM_DD>
Specifies the date format.
DD_MM_YY: The date January 30th 2009 will be displayed: 30.01.09
MM_DD_YY: The date January 30th 2009 will be displayed: 01.30.09
YY_MM_DD: The date January 30th 2009 will be displayed: 09.01.30
Example:
xConfiguration Time DateFormat: DD_MM_YY
xConfiguration Time TimeFormat:
<24H/12H>
Specifies the time format.
24H: Set the time format to 24 hours.
12H: Set the time format to 12 hours (AM/PM).
Example:
xConfiguration Time TimeFormat: 24H
The System Unit settings
The Time settings
Contents
Introduction
Getting started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xConfiguration
