D14128.03—JULY 2009
77
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xCommand CallLog Received Delete
Delete log of received calls. If a logtag is given as argument, that specific call is deleted from the log. If not
logtag is give, the complete received calls list will be deleted.
Parameters: Required parameters are marked with (
r
):
LogTag: <0..2147483647>
Example:
xCom mand CallLog Received Delete LogTag:126
*r DeleteResult (status=OK):
*r/end
xCommand CallLog Missed Delete
Delete log of missed calls. If a logtag is given as argument, that specific call is deleted from the log. If not
logtag is give, the complete missed calls list will be deleted.
Parameters: Required parameters are marked with (
r
):
LogTag: <0..2147483647>
Example:
xCom mand CallLog Missed Delete LogTag:119
*r DeleteResult (status=OK):
*r/end
xCommand CamCtrlPip
Can be used to show or hide a small window with the camera selfview, while adjusting the camera position for
instance. (If selfview isn’t already shown)
Parameters: Required parameters are marked with (
r
):
Mode(
r
): <On/Off>
Example:
xCom mand CamCtrlPip Mode: On
*r CamCtrlPipResult (status=OK):
** end
The Call Log commands,
cont...
The Camera Control PiP command
Contents
Introduction
Getting started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xCommand
