D14128.03—JULY 2009
85
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xCommand Standby Activate
Set system in standby mode, which will turn off the video outputs and put the camera to sleep.
Example:
xCom mand Standby Activate
*r ActivateResult (status=OK):
*r/end
xCommand Standby Deactivate
Bring system out of standby mode.
Example:
xCom mand Standby Deactivate
*r DeactivateResult (status=OK):
*r/end
xCommand Standby ResetTimer
System will enter standby mode after time specified by Delay parameter.
Parameters: Required parameters are marked with (
r
):
Delay: <1..480>
Example:
xCom mand Standby ResetTimer Delay:10
*r ResetResult (status=OK):
*r/end
xCommand SystemUnit OptionKey Add
Add option key to add extra system capabilities, e.g. Multisite.
Parameters: Required parameters are marked with (
r
):
Key(
r
): <S: 16, 24>
Example:
xCom mand SystemUnit OptionKey Add Key:******************
*r OptionKeyResult (status=OK):
*r/end
xCommand SystemUnit ReleaseKey Add
Add software release key. Used to enable new software (applicable for main sw releases).
Parameters: Required parameters are marked with (
r
):
Key(
r
): <S: 16, 24>
Example:
xCom mand SystemUnit ReleaseKey Add Key:******************
*r ReleaseKeyResult (status=OK):
*r/end
xCommand SystemUnit AdminPassword Set
Set administrator password to access the codec.
Parameters: Required parameters are marked with (
r
):
Password(
r
): <S: 0, 255>
Example:
xCom mand SystemUnit AdminPassword Set Password:***********
*r AdminPasswordSetResult (status=OK):
*r/end
xCommand SystemUnit MenuPassword Set
Set password needed to access the Advanced menu settings.
Parameters: Required parameters are marked with (
r
):
Password(
r
): <S: 0, 255>
Example:
xCom mand SystemUnit MenuPassword Set Password:***********
*r MenuPasswordSetResult (status=OK):
*r/end
The System Unit commands
The Standby commands
Contents
Introduction
Getting started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xCommand
