D14128.03—JULY 2009
71
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xCommand Audio Microphones Mute
Mute all microphones.
Example:
xCom mand Audio Microphones Mute
*r AudioMicrophonesMuteResult (status=OK):
** end
xCommand Audio Microphones Unmute
Unmute microphones.
Example:
xCom mand Audio Microphones Unmute
*r AudioMicrophonesUnmuteResult (status=OK):
** end
xCommand Audio Sound Play
Play specified audio sound.
Parameters: Required parameters are marked with (
r
):
Sound(
r
): <Busy/CallWaiting/KeyTone/Ringing/SpecialInfo/TelephoneCall/VideoCall>
Loop: <On/Off>
Example:
xCom mand Audio Sound Play Sound: Ringing
*r AudioSoundPlayResult (status=OK):
** end
xCommands with parameters
In the following pages you will find a complete list of all xCommand type commands with parameters.
We recommend you visit the TANDBERG web site regularly for updated versions of the manual.
Go to:
The Audio commands
xCommand Audio Sound Stop
Stop playing audio sound.
Example:
xCom mand Audio Sound Stop
*r AudioSoundStopResult (status=OK):
** end
xCommand Audio Vumeter Start
Start collecting VU meter information for connector given by type and ID.
Parameters: Required parameters are marked with (
r
):
ConnectorType(
r
): <HDMI/Line/Microphone>
ConnectorId(
r
): <1..8>
Example:
xCom mand Audio Vumeter Start ConnectorType: Microphone ConnectorId: 1
*r AudioVumeterStartResult (status=OK):
** end
xCommand Audio Vumeter Stop
Stop collecting VU meter information for connector given by type and ID.
Parameters: Required parameters are marked with (
r
):
ConnectorType(
r
): <HDMI/Line/Microphone>
ConnectorId(
r
): <1..8>
Example:
xCom mand Audio Vumeter Stop ConnectorType: Microphone ConnectorId: 1
*r AudioVumeterStopResult (status=OK):
** end
xCommand Audio Setup Clear
Removes all local inputs and local outputs. See the Appendix > Dynamic audio API section.
Example:
xCom mand Audio Setup Clear
*r AudioSetupClearResult (status=OK):
** end
The Audio commands,
cont...
Contents
Introduction
Getting started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xCommand
