D14128.03—JULY 2009
53
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xConfiguration Audio Input Microphone [1..8] Mode:
<On/Off>
Determines whether or not a microphone input is enabled. Addresses the specific microphone input.
On: Set to On to enable the microphone input.
Off: Set to Off to disable the microphone input.
Example:
xConfiguration Audio Input Microphone 1 Mode: On
xConfiguration Audio Input Microphone [1..8] Type:
<Microphone/Line>
The microphone inputs are intended for electret type microphones. The microphone input can be set to line
or microphone mode. Addresses the specific microphone.
Microphone: 48 V Phantom voltage and pre-amplification is On
Line: Select Line when you have a standard balanced line input. The phantom voltage and pre-amplification
is Off.
Example:
xConfiguration Audio Input Microphone 1 Type: Line
xConfiguration Audio Output HDMI [1, 3] Level:
<-24..0>
Defines the output level of HDMI output 1 or 3 in steps of 1 dB from -24 dB to 0 dB. Addresses the specific
HDMI output.
See the Audio Level tables in the Codec C90 System Integrators Guide for a complete overview of the menu
values represented in dB.
Range: -24 to 0 dB
Example:
xConfiguration Audio Output HDMI 1 Level: 0
xConfiguration Audio Output HDMI [1, 3] Mode:
<On/Off>
Determines whether or not the audio channel on the HDMI output should be enabled. Addresses the
specific Audio HDMI output.
On: Set to On to enable the audio channel on the HDMI output 1 or 3.
Off: Set to On to disable the audio channel on the HDMI output 1 or 3.
Example:
xConfiguration Audio Output HDMI 1 Mode: On
xConfiguration Audio Output Line [1..6] Channel:
<Left/Right/Mono>
Defines whether the Audio Line output is a mono signal or part of a multichannel signal.
Left: The Audio Line output signal is the left channel of a stereo signal.
Right: The Audio Line output signal is the right channel of a stereo signal.
Mono: The Audio Line output signal is a mono signal.
Example:
xConfiguration Audio Output Line 1 Channel: left
xConfiguration Audio Output Line [1..6] Level:
<-24..0>
Defines the output level of the specified Audio Output Line in steps of 1 dB from -24 dB to 0 dB. Addresses
the specific Audio Line output connector.
See the Audio Level tables in the Codec C90 System Integrator Guide for a complete overview of the menu
values represented in dB.
Range: -24 to 0 dB
Example:
xConfiguration Audio Output Line 1 Level: -10
xConfiguration Audio Output Line [1..6] Mode:
<On/Off>
Determines whether or not an Audio Line output is enabled. Addresses the specific Audio Line output.
On: Set to On to enable the Audio Line output.
Off: Set to Off to disable the Audio Line output.
Example:
xConfiguration Audio Output Line 1 Mode: On
xConfiguration Audio Output Line [1, 3] Type:
<Auto/SPDIF>
Determines if the Audio Line output is an analog or digital type output. Addresses the specified Audio Line
output (1 or 3).
Auto: If a TANDBERG Digital NAM is detected then SPDIF mode will be selected, otherwise analog mode
will be selected.
SPDIF: Set to SPDIF when you want the Audio Line 1 or 3 output to be in digital mode.
Example:
xConfiguration Audio Output Line 1 Type: Auto
xConfiguration Audio Output Line [2, 4, 5, 6] Type:
<Analog>
Line output 2, 4, 5, 6 are dedicated analog outputs, hence type can be set to analog only.
Example:
xConfiguration Audio Output Line 2 Type: Analog
xConfiguration Audio SoundsAndAlerts KeyTones Mode:
<On/Off>
The system can produce a sound every time a key on the remote control is pressed.
On: There will be a sound indicator when pressing keys on the remote control.
Off: The remote control Key Tones is switched off.
Example:
xConfiguration Audio SoundsAndAlerts KeyTones Mode: Off
xConfiguration Audio SoundsAndAlerts RingTone:
<Marbles/IceCrystals/Polaris/Alert/
Discrete/Fantasy/Jazz/Nordic/Echo/Rhythmic>
Selects the ring tone for incoming calls.
Range: Select a tone from the list of ring tones.
Example:
xConfiguration Audio SoundsAndAlerts RingTone: Jazz
Contents
Introduction
Getting started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
xConfiguration
