Home
/
TANDBERG
/
3000 MXP Profile
/
User Manual

TANDBERG 3000 MXP Profile, User Manual, Page: 95 / 333

Share

Page: 95 / 333

Administrator Settings

81

3.11.7

Display Snapshot

The system stores the last sent or received Snapshot. The snapshot is deleted automatically after
the call.

How to display snapshots:

1.  To view a stored snapshot, first choose the Snapshot header.
2.  Select Display Snapshot in the Presentation menu.
3.  Press the Hide Snapshot button to deselect it.
4.  When disconnecting the call, the stored snapshot will be erased.

Receiving snapshots:

1. When receiving a snapshot, the snapshot is displayed in full screen.
2. Press OK to exit from the snapshot. The last sent or received snapshot will be stored in

the graphics memory and erased once the call is disconnected.

Note that Display Snapshot is only available when you have a stored snapshot.

«
...
93
94
95
96
97
...
»

Summary of Contents for 3000 MXP Profile














































































































































































































































































































































Reviews:

No comments