manualshive.com logo in svg

TANDBERG 3000 MXP Profile, User Manual, Page: 62 / 333

Share
Download
TANDBERG 3000 MXP Profile User Manual Download Page 62

TANDBERG 3000 MXP 

48 

3.8 Standby 

 

 
The system will automatically go to Standby mode when it is not in use. In standby mode, the 
screen(s) are black. It is however still possible to receive incoming calls. 
 

How to enter standby mode manually: 

ƒ

 

Select Standby from the menu and select Standby Now, or 

ƒ

 

Press the End Call button on the remote control twice. 

 

How to exit standby mode: 

ƒ

 

When the system is in standby, pick up the remote control, or press any of its keys to 
activate the system again. 

 
The standby mode of the system should be enabled if the system is to be left idle. 
 

 
Note! Standby is not activated by switching off the power to the monitor(s) (some systems 
come with monitors that are not possible to switch off.).  
 

When Camera Standby Mode is On 

When Camera Standby mode is On, the camera turns away when standby is activated. When the 
system is activated the camera turns back to normal position. 

 
If the system is set for Use screen as Local PC monitor, see 

Screen Settings

, the Standby 

mode will be disabled when the codec detects a video signal from the PC. If the PC video 
signal is not detected, the standby mode will be re-enabled.  
 

 
It is possible to postpone the system from entering standby mode for 1 hour or 3 hours, see 

Delay 

Standby for 1 hour

 and 

Delay Standby for 3 hours

. 

Summary of Contents for 3000 MXP Profile














































































































































































































































































































































Reviews:

No comments