TANDBERG 3000 MXP Profile User Manual Download Page 60

Page: 60 / 333

TANDBERG 3000 MXP

3.6 Answer an incoming call

How to answer an incoming call:

To accept an incoming call, press the OK button or the green Call button on the remote
control.

How to reject an incoming call:

To reject an incoming call, select the Reject icon and press the OK button, or press the
End Call button on the remote control.

Incoming calls will connect automatically if Auto Answer is set to On, see

Auto Answer

for details.

When idle, the system will accept all incoming calls as long as Incoming MCU Calls and Incoming
Telephone Calls are set to On, see

Permissions

for details. Also, Do Not Disturb must not be

activated, see

Do Not Disturb

for more details.

Summary of Contents for 3000 MXP Profile














































































































































































































































































































































Search results

Summary of Contents for 3000 MXP Profile

Reviews:

TANDBERG 3000 MXP Profile, User Manual, Page: 60 / 333

Search results

Summary of Contents for 3000 MXP Profile

Reviews: