manualshive.com logo in svg

TANDBERG 3000 MXP Profile, User Manual, Page: 268 / 333

Share
Download
TANDBERG 3000 MXP Profile User Manual Download Page 268

TANDBERG 3000 MXP 

254 

Dynamic bandwidth adjustment (H.323) 
 

NETWORK FEATURES 

Auto H.320/H.323 dialing 
SIP 
Downspeeding 
Programmable network profiles 
Intelligent Call Management 
Maximum call length timer 
Automatic SPID and line number configuration 
(National ISDN, GR-2941-CORE) 
Soft

Mux 

H.331 Broadcast Mode 
NATO standard KG194/KIV-7 encryptor support** 
URI Dialing 
 

MULTISITE FEATURES 

H.323/H.320/SIP/Telephony/VoIP in the same conference 
Audio and Video Transcoding 
Video rate matching from 56 kbps - maximum conference 
rate 
CP4 and Voice Switched 
Best Impression (Automatic CP Layouts) 
H.264, Encryption, Digital Clarity 
Dual Stream from any site 
ISDN & IP Downspeeding and IPLR 
MultiSite (H.243) Cascading on H,320 & H.323 
Unicode h.243 Terminal Names 
Dial in/Dial out 
Chair control for host system 
Snapshot of ongoing conference (JPEG) 
Snapshot of ongoing DuoVideo/H.239 presentation (JPEG)
Separate welcome page for encrypted conferences 
Conference rates up to 2.3 Mbps with optional bandwidth 
upgrade (1.5 Mbps is standard conference rate) 
Up to 4 video and 3 audio sites 
4 sites @ 768 kbps (+telephone calls) 
Mix ISDN-BRI and IP up to maximum conference rate 
 

EMBEDDED ENCRYPTION 

H.320 and H.323 point-to-point calls 
Standards-based: H.233, H.234, H.235 v2&v3, DES and 
AES 
NIST-validated AES 
NIST-validated DES 
Automatic key generation and exchange 
Supported in Dual Stream 

 

 

CUSTOMIZED WELCOME SCREEN AND COMPANY 
LOGO 

Picture JPEG (logo.jpg): Recommended maximum size is 
704x576 for Welcome Screen and 352x288 for Encryption 
Required Screen 
 

POWER 

100-240VAC, 60/50Hz, 6A 
 

OPERATING TEMPERATURE AND HUMIDITY 

0° C to 40° C (32° F to 104° F) ambient temperature 
10% to 90% Relative Humidity (RH) 
 

STORAGE AND TRANSPORT TEMPERATURE 

-20° C to 60° C (-4° F to 140° F) at RH 10-90% (non-
condensing) 
 

APPROVALS 

Directive 73/23/EEC (Low Voltage Directive) 
- Standard EN 60950 
Directive 89/336/EEC (EMC Directive) 
- Standard EN 55022, Class B 
- Standard EN 55024 
- Standard EN 61000-3-2/-3-3 
Directive 1999/5/EEC (R&TTE Directive) 
- Standard TBR3 
Approved according to UL 60950 and CAN/CSA C22.2 
No. 60950 
Complies with FCC15B Class B 
 

FOOTPRINT 
WALL-MOUNT WITH PEDESTAL: 

Width: 22"/56 cm Depth: 4.7"/12 cm 

ROLLABOUT: 

Width: 35.4"/90 cm Depth: 29.7"/75.5 cm 

 

 
 

PRODUCT RELIABILITY / MTBF 

The predicted reliability is expressed in the expected random Mean Time Between Failures (MTBF) for the electronic 
components based on the Power On Hours: 
Power On Hours (POH) > 69 000 hours 
Useful Life Cycle > 6 years  
ISO 9001 certificate is available upon request 
 
* Requires TANDBERG Management Suite 9.0 or newer 
 
** Optional equipment, must be specified at the time of order. 
 
System features vary depending on network selection and software package. All specifications are subject to change 
without notice. TANDBERG is a registered trademark or trademark of TANDBERG in the U.S. and other countries. 
RealPlayer is a trademark or a registered trademark of RealNetworks, Inc. QuickTime is a registered trademark of Apple 
Computer, Inc., registered in the U.S. and other countries. Microsoft and NetMeeting are either registered trademarks or 
trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are property of their 
respective owners. Contains iType

TM

 from Agfa Monotype Corporation 

 
Service availability may vary from region to region. Please contact your TANDBERG reseller for more information. 

Summary of Contents for 3000 MXP Profile














































































































































































































































































































































Reviews:

No comments