manualshive.com logo in svg

TANDBERG 3000 MXP Profile, User Manual, Page: 47 / 333

Share
Download
TANDBERG 3000 MXP Profile User Manual Download Page 47

Administrator Settings 

33 

 

3.3 On-screen Indicators 

 

 
The system has a number of icons signaling different settings: 
 
 

 

Microphone Off 

This indicator is shown when the microphone is turned off. Press the Mic off 
button again to turn the microphone back on, see 

Mic Off

 for details. 

 
 

 

Volume Off 

This indicator is shown when the volume is turned off. Press  to turn the 
volume back on, see 

and -

 for details. 

 
 

 

Secure Conference, AES 

This double padlock indicator is shown when AES encryption (Secure 
Conference) is active, see 

Security

 for details. 

 
 

 

Secure Conference, DES 

This padlock indicator is shown when DES encryption (Secure Conference) is 
active, see 

Security

 for details. 

 
 

 

Not Secure Conference 

This open padlock indicator is shown during the initialization phase for AES or 
DES encryption. During this period the call is not secure, see 

Security

 for details. 

 
 

 

 

Warning 

This indicates that the system has detected a warning. Select the icon and press 
OK to see details on the warning. Please see 

Warnings

 for a list of possible 

warnings. 
 
 

 

 

Bad Network 

This indicator appears if the system detects network anomalies like packet loss 
(5%), jitter (200ms) etc., during a call. Open the menu by pressing the OK/Menu 
button and select the warnings icon too see details. 
 

 

Floor 

This indicator is shown when you are displayed in full screen in a multipoint 
conference, see 

Request Floor and Release Floor

 for details. 

 
 
 

Summary of Contents for 3000 MXP Profile














































































































































































































































































































































Reviews:

No comments