manualshive.com logo in svg

TANDBERG 3000 MXP Profile, User Manual, Page: 294 / 333

Share
Download
TANDBERG 3000 MXP Profile User Manual Download Page 294

TANDBERG 3000 MXP 

280 

 

Function 

Port 

Type 

Gatekeeper Discovery (RAS) 

1719 

UDP 

Q.931 Call Setup 

1720 

TCP 

H.245* 

Range 5555-5574 

TCP 

Video 

Range 2326-2405 

UDP 

Audio 

Range 2326-2405 

UDP 

Data/FECC 

Range 2326-2405 

UDP 

Mul Duo Video 

 
(*) Note: While using MultiSite, if a site is disconnected and reconnected without terminating the 
entire conference, the next site to be connected will have a H.245 port outside of the specified 
range. If this functionality is required through a firewall, the range of TCP ports can be extended 
past 5564. However, if a site is disconnected and reconnected, without ending the conference 
enough times one can quickly end up outside of this range again. 

Summary of Contents for 3000 MXP Profile














































































































































































































































































































































Reviews:

No comments