manualshive.com logo in svg

TANDBERG 3000 MXP Profile, User Manual, Page: 85 / 333

Share
Download
TANDBERG 3000 MXP Profile User Manual Download Page 85

Administrator Settings 

71 

 

3.10.5 Picture 

Control 

 

 
Focus, Brightness and White balance are set for auto focus, auto brightness and auto white 
balance by default. If you need to set focus, brightness and white balance manually, go to Picture 
Control in the Camera Control menu. 
 

Focus

 

 Auto    

Auto focus continuously updates the focus throughout the call. When moving 
the camera, the system will use auto focus for 5 seconds to set the right focus 
of the new camera position. After 5 seconds auto focus is turned off to prevent 
continuous focus adjustments of the camera. 
 

Manual at 
Precision 
HD Camera 

 

When Manual is selected the + and - buttons are enabled. Select the + or - 
button and press OK button to adjust the focus. The manual focus has 10 
steps. If focus is set manually, the system will stay in manual focus and not 
change to auto focus automatically even if you zoom or move the camera. 
When the user zoom or move the camera and manual focus is on, the indicator 
line should say “Manual Focus”. 
 

Manual at 
WAVE II 
Camera

 

When Manual is selected, the slide bar is enabled. Use the arrow keys to 
adjust the focus. The temporary focus will last until you move the camera again 
and auto focus will take effect. 
 

 

Camera Brightness

 

Auto    
   

Auto brightness continuously updates the brightness of the camera picture. 
 

Manual 

When Manual is selected, the slide bar is enabled. Use the arrow keys to manually 
adjust the camera brightness. If brightness is set manually, the system will keep 
this brightness level also when the camera is moved. When the user zoom or 
move the camera and manual brightness is on, the indicator line should say 
“Manual Brightness”. 
 

 

White Balance

 

  Auto 

Auto white balance continuously updates the white balance. 
 

 Manual  

When Manual is selected, the slide bar is enabled. Use the arrow keys to 
manually adjust the white balance. The manual white balance has 10 steps. If 
white balance is set manually, the system will keep this white balance also when 
the camera is moved. When the user zoom or move the camera and manual 
white balance is on, the indicator line should say “Manual White Balance”. 
 

 

Backlight Compensation*

 

On 

The Backlight Compensation can be set to On. 
 

Summary of Contents for 3000 MXP Profile














































































































































































































































































































































Reviews:

No comments