manualshive.com logo in svg

TANDBERG 3000 MXP Profile, User Manual, Page: 27 / 333

Share
Download
TANDBERG 3000 MXP Profile User Manual Download Page 27

Installation 

13 

 

2.2 Connecting Cables 

 

 
All cables needed for a standard configuration are already connected to the codec. Connect 
these cables to their respective parts of the system. 
 

1. Power cables 

Connect the power cable to an electrical distribution socket. 
 

2. Monitor cables 

Connect the DVI cable to the input on your monitor. 
 

3. Microphone cables 

Connect the microphone cable to the microphones. 
 

4. Camera cable 

When installing the Precision HD Camera, please follow the instructions in the enclosed 
Installation Sheet for TANDBERG 3000 MXP Profile. Installation Sheets are also found on the 
User Manuals CD. 
 
NOTE! The enclosed TANDBERG Camera Cables must be used! Do not use other camera 
cables as this might cause problems with the transfer of video signals from the Precision HD 
Camera. 
 
If you have a WAVE II Camera: Connect the camera cable labeled “Main Cam” to the S-Video 
connector on the camera. Connect also the control cable labeled “Camera Control” between 
the RJ-45 on the camera, and the Camera Port on the codec. 
 

5. PC cable 

Connect the PC cable to the PC. 
 

6. ISDN cables 

Connect the ISDN cables to the ISDN sockets (S/T interface) provided by the network provider. 
The main ISDN number will be that number associated with the socket to which ISDN cable 
number 1 has been connected. 
 

 
Note! The system does not have a built-in network terminator. If wall socket provides an 
ISDN U-interface, an NT1 between your system and the ISDN line is needed, see 

Appendix 

10

 for more information.  

 

 

7. LAN cable 

To connect the system to a Local Area Network (LAN), connect the cable labeled "LAN 
Ethernet" to a suitable Ethernet port on the LAN. 

Summary of Contents for 3000 MXP Profile














































































































































































































































































































































Reviews:

No comments