TANDBERG 3000 MXP Profile, User Manual, Page: 30 / 333

TANDBERG 3000 MXP
16
These settings may be left unchanged if no special needs are required. See chapter
General Settings for more information.
6. Screen Settings
When using wide screen (16:9) monitors, set TV Monitor Format to Wide (16:9).
TANDBERG also recommends setting Picture Layout to Picture outside Picture when
using 16:9 monitors. Picture outside Picture provides a display layout optimized for
wide screen monitors. The display layout may be changed at any time using the
Layout button on the remote control.
7. Software Options
This menu item will display the currently installed options (such as MultiSite,
Presenter and high bandwidth options). To activate any purchased software option
for the system, an option key must be obtained and then entered into the Software
Options menu (see paperwork accompanying the system for option keys). The
MultiSite and Presenter option keys should be entered under “New Option Key”. Any
bandwidth option keys should be entered under “New Bandwidth Key”. You may
need to restart the system for options to take effect. For more information on these
options, please contact your TANDBERG representative.
8. Date and Time Settings
Select your preferred Date and Time Settings.
9. Save changes
Remember to select the on-screen Save icon on the bottom of each menu (highlight
using arrows and use the OK button to select) to save the changes you may have
made.
Network configuration:
1. Open the Network menu
Press OK/Menu to open the Menu, if not already displayed. Select Control Panel -
Network to open the Network menu.
2. ISDN configuration
Set the Network type to the desired network. Specify the settings for the selected
network in the relevant menu. For details, follow the instructions in
ISDN-BRI
Settings . See also the examples in Appendix 9: Connecting the system to the
Switched 56 network and in Appendix 10: Connecting the system to ISDN using NT1
network adapters .
3. LAN configuration