TANDBERG 3000 MXP Profile, User Manual, Page: 20 / 333

TANDBERG 3000 MXP
6
The camera cables are put through the camera bracket, which is then mounted on top of the
monitor. The main camera is fastened to the camera bracket.
TANDBERG WAVE II Camera
The TANDBERG WAVE II camera includes a high quality color camera with a fast
pan/tilt/zoom/focus action. It is controlled by the system’s remote control and operates pan/tilt,
focus and zoom. Up to fifteen camera positions can be pre-stored using Camera Presets.
Monitors
The monitor displays the far-end and near-end videoconferencing sites in addition to the menus,
video from connected video sources and high-resolution images.
NOTE: The TANDBERG 3000 MXP Profile is shipped with different monitors depending on which
configuration is ordered. There are two different configurations of the system: 32”, which has a
32” LCD monitor and the 42” configuration, which has a 42” plasma monitor. Hence, the
pictures/drawings used in this manual might differ from the actual monitor model shipped with the
system.
Codec
The codec is the heart of the system. Its main task is the compression of outgoing video, audio
and data, the transmission of this information to the far end, and the decompression of the
incoming information. The name codec comes from a combination of the two words compression
and decompression.
Column and Base
The Roll About system is easily movable due to large wheels and handles, at the back of the
monitor. The codec is located inside the bracket assembly behind the monitor. Inside the column
assembly, there is room for additional equipment, e.g. a VCR or a DVD player.