Tanco 1400 Autowrap, Operator'S Handbook Manual, Page: 62 / 132

Tanco Autowrap - 1400
Operator’s Manual
61
11. Maintenance
Periodic Maintenance
Bearings
All ball-bearings are packed with grease, and do not need any more maintenance.
Pre-Stretchers
If the machine is in daily use, the Gears under the plastic cover on the dispenser should be greased when
needed.
Cutters / Film Holders
The cutter / film holder is pre-adjusted from the factory and does not need further adjustments. When
replacing spare parts, it is necessary to adjust it. The springs for the U-shaped slot shall be adjusted so that
they are almost completely squeezed together when the cutter-arm is all down.
Cleaning
The machine should be cleaned and oiled regularly and at the end of the wrapping season.
When using high pressure washing apparatus, care must be taken with the electrical installation.
Also make sure that water is not sprayed directly into the bearings, etc. Keep the control box protected
from rain and water. If necessary use compressed air to dry electrical components.
Hydraulic Cylinders
Make sure that all hydraulic cylinders are closed when storing the machine.
Quick Couplers
Ensure that the quick couplers are kept clean and apply the dust caps after use.