Tanco 1400 Autowrap, Operator'S Handbook Manual, Page: 29 / 132

Tanco Autowrap - 1400
Operator’s Manual
28
In ‘M’ mode: Load Up
In ‘A’ mode: Starts Auto Load (Auto Hand Cont. : ON)
In ‘M’ mode: Squeeze In
In ‘M’ mode: Squeeze Out
In ‘A’ mode: Starts Auto Wrap (Auto Hand Cont. : ON)
In ‘M’ mode: Load Down
In ‘A’ mode: Starts Auto Off-load (Auto Hand Cont. : ON)
Operation
Operation in Automatic mode
The automatic sequence is made up of three sections: Loading, Wrapping and Off-loading.
The controller comes initially set so one press of a button automatically loads the bale, a second press
runs the complete wrapping cycle and a third press automatically off-loads the bale.
It is possible to set the controller so one button press runs the complete cycle, see ‘Changing Default
Automatic Sequence’.
As initially set three buttons on the controller are used to start each section of the sequence, see points,
3, 5, and 7 below.
Fig. 12
7. Controller Information