Tanco 1400 Autowrap, Operator'S Handbook Manual, Page: 33 / 132

Tanco Autowrap - 1400
Operator’s Manual
32
- Load Arm Down (on Hand Held Controller)
Pressing the Downwards button on the Hand Held Controller lowers the Load Arm.
- Squeeze Arm In (on Hand Held Controller)
Pressing the button with both arrows facing one another closes the Load Arm in.
- Squeeze Arm Out (on Hand Held Controller)
Pressing the button with both arrows facing away from one another opens the Load Arm.
- Add 1 Wrap
Each time you press (R4) an additional wrap will be put on the current bale if the wrapping sequence is
in progress, or onto the next bale if the automatic cycle has not yet been started. You can add as many
wraps as required.
Operation in Manual Mode
‘M’ on the display indicates that the controller is set in manual mode. If not, press (L6) to select.
In Manual Mode you have total control of every stage of the wrapping cycle. The software logic
determines which manual functions can be activated at any point in the wrapping cycle. Should the
operator incorrectly select a function at a certain stage during the wrapping cycle, then that operation
will not be performed.
7. Controller Information