Tanco 1400 Autowrap, Operator'S Handbook Manual, Page: 28 / 132

Tanco Autowrap - 1400
Operator’s Manual
27
Display; Shows in normal working mode:
- Current No. of Wraps
- Target No. of Wraps
- Wrapping Speed (R.P.M)
- Bale Total (10 Separate Stores)
- Grand Total No. of Bales
- Mode: M (Manual) / A (Automatic)
R1 - Move Drawbar to Working Position
R2 - Release Film Grip
R3 - Fast Wrap / Resume Wrap (After Manually Pausing)
R4 - Adds 1 Wrap to Current or Next Bale
R5 - Bale Off-load
In ‘M’ (mode): Tips Bale
In ‘A’ (mode): Starts Auto Off-load -
Off-loads Bale, lowers front to load position &
returns rear roller to working position
R6 - Start Automatic Wrapping Cycle; press STOP
switch to stop cycle
4-Way Menu Switch:
- Set No. of Wraps
- Change / Reset Bale Sub-Total
- Access Operator Setup Menu
- Access Technician Setup Menu
L1 - Move Drawbar to Transport Position
L2 - Cut & Grip Film
L3 - Slow Forward to Park Position /
Controlled Stop during Wrapping
L4 - Reverse Wrap Arm
L5 - Bale Loading
In ‘M’ (mode): Returns rear roller to working position
In ‘A’ (mode): Starts Auto Load - Squeezes Bale, Loads
Bale & returns rear roller to working position
Power On/Off / Emergency Stop
L6 - Select Operating Mode: ‘M’ or ‘A’
Fig. 11
7. Controller Information